Skip to content
HomeGradingThe FCG Standard

The FCG Standard

The written rules behind every subgrade, with real example photos at each grade.

Corners

10
10At least three of four corners sharp, with allowance for very minor rounding on one.
9.5
9.5A tiny bit of rounding on one or two corners while the rest are sharp.
9
9Rounding reaches deeper into the corner. Two corners like this is a 9 regardless of the others.
8.5
8.5Damage visible to the naked eye. The damaged corner sets the subgrade.

Edges

10
10Straight along its length, no fraying, a very small allowance for imperfection.
9.5
9.5Minor fraying on a small portion while the rest of the edge is straight.
9
9Fraying is more severe or the edge appears jagged along larger portions.
8.5 to 9
8.5 to 9Unevenness on the cut plus fraying, judged on how the whole edge looks.

Surface

10
10Nothing visible to the naked eye. Small imperfections allowed under magnification.
9.5
9.5A scratch, dent, print line, or smudge is present.

Severity and count decide the surface subgrade. Fingerprints and smudges knock it down. Cross lighting picks up dents that are barely visible to the naked eye.

Centering

Borders are enlarged and measured in tenths of a millimeter. The difference between the two borders is divided by the total.

  • 7% or under: 10
  • 7 to 10%: 9.5
  • 10 to 13%: 9
  • Back centering of 80/20 or worse: half a point off the centering subgrade

Combining Subgrades

When corners or centering is the lowest subgrade, the final grade is at most half a point above it. When surface or edges is lowest, the final grade can be a full point above it, rounded up only when the other three subgrades sit at least a point higher. With matching lowest subgrades, the final grade cannot exceed that number when corners or centering is involved.

Ready When You Are

Fill out the submission form, pack your cards in order, and ship them or drop them off at the FCG office in Mansfield.