Skip to content
HomeGrading

How We Grade

Every card goes under the microscope. Every subgrade follows a rule you can read.

How a Card Gets Its Grade

Read the FCG Standard
  1. Centering

    Borders enlarged and measured to a tenth of a millimeter. 7% or under is a 10.

    Measured to 0.1 mm
  2. Corners

    Three of four sharp for a 10. Visible damage sets the subgrade on its own.

    Microscope
  3. Edges

    Straight with no fraying for a 10. Chips and uneven cuts step it down.

    Raking light
  4. Surface

    Cross lighting finds dents, print lines, scratches, and prints.

    Cross lighting

Where It Happens

Every card is measured and lit at the same station.

FCG grading station
Card under the microscope
Finished FCG slabs
10Gem Mint

What a 10 means

Virtually perfect. Sharp corners, clean edges, centering within 7%, and nothing on the surface beyond what magnification allows.

See example photos

When Corners or Centering Is Lowest

The final grade is at most half a point above the lowest subgrade. If two tie for lowest and either is corners or centering, the final grade cannot exceed that number.

When Surface or Edges Is Lowest

The final grade can be a full point above the lowest subgrade, rounded up only when the other three sit at least a point higher.

Quality Control Before Anything Ships

Label accuracy, spelling, and grade consistency are checked on every slab. A wrong label never leaves the building.

Ready When You Are

Fill out the submission form, pack your cards in order, and ship them or drop them off at the FCG office in Mansfield.